Email: rdb1027@yahoo.com
     Phone: (720) 435-6918
   Golden, CO 80401 
 
 

 
 
WOODFLOOR MAINTENANCE

Wood Floor Maintenance

Keeping your hardwood floors clean and beautiful is as simple as vacuuming or sweeping and mopping. After vacuuming or sweeping, we recommend either a mixture of one cup of white vinegar to one gallon of water mixed in a spray bottle or one of the commercial hardwood floor cleaners on the market. Simply spray on the solution and wipe off with a dry mop.

For newly finished hardwood floors, use floors with care the first two weeks after application of the final coat of finish. You can generally walk on the floor the next day, but we recommend that furniture not be put into the room for three days. It is recommended that the floors be walked on in stocking feet only. No street shoes or bare feet. Also, no carpets should be placed or mopping should be done on the floors during this first two week period.

Vacuum or use an untreated dust mop on your floor regularly. This will keep the sand and grit off of your floor that may cause premature wear. Throw rugs that are cleaned on a regular basis are recommended in front of your kitchen sink and at each outside door. Rubber-backed rugs should not be used on hardwood floors.

Wipe up food and other spills immediately using a dampened (not soaking wet) cloth or paper towel. Use the white vinegar/water mixture or other reputable hardwood floor cleaner and follow the directions on the label.

Protect your flooring investment by using floor protectors on your chairs and other furniture. These should be checked periodically for wear or grit.

Keep high heel shoes in good repair. Heels that have lost the protective cap can cause indentions in any floor surface-even concrete!

Do not use wax or other products that contain wax on your hardwood floors. If wax is applied, recoating may not be possible. It would be necessary to refinish (sand down to bare wood and apply polyurethane) to properly apply a finish coat.

As your floor begins to show wear, recoating is recommended. This procedure consists of using a fine abrasive screen or chemical preparation (depending upon the extent of wear and debris) on the existing finish and applying another coat of polyurethane. There is no dust involved in this process. Recoating on a regular, periodic basis will create a build-up of cured coats over the years. Unless there are deep scratches or water damage, hardwood floors should never have to be refinished. Give us a call at Aboveboard to schedule a time to recoat.

 
 
Menu Items
 
 Home
 
 Basic Floors
   Simple Floors
   Inlaid Borders
   Transitions
   Designer Inlays
   Exotic Wood
 
 Galleries
   Church Stage
   Stairs
   More...
 
 Flooring 101
   Anatomy
   After Installation
   Maintenance